IMPORTANT NOTICE: The Ads on this site are GUARANTEED VIRUS FREE, your computer will not get a Virus from our ads.

Author Topic: How to Wire an Internally Regulated Alternator (Delco type CS130 series)  (Read 19399 times)


  • Internet Guy
  • Administrator
  • Full Member
  • *****
  • Posts: 118
  • Karma: +0/-0
    • View Profile
delco remy, high output alternator, starter motor, alternator, alternators, starter, starters, powermaster
[h=1]How to wire the internally Regulated GM Delco-Remy Alternator. Delco-Remy CS-130 Internally Regulated Alternator Wiring Diagram GM CS130 Series Internal Regulated Alternator Wiring[/h]

Wiring instructions for the GM Delco Remy internal regulated cs130 alternator. How to wire a GM cs130 alternator. The GM Delco-Remy cs130 alternator was used on GM vehicles from about 1986-1996. 1995 -1998 was a transitional period for the cs-130. Between those years you may have the CS-130 or the CS-130D alternator. The wiring hookup is the same for the CS-130 and CS-130D alternators. On both the CS-130 and CS-130D alternators must have a resisted ignition wire to the "L" terminal. Resistance can be obtained thru use af a resistor or you can use the no charge light as the resistor, the light bulb will supply proper resistance. Caution: if you connect a full 12 volts to the "L" terminal without the resistor it will cause the voltage regulator to fail

« Last Edit: November 23, 2009, 05:42:14 PM by drew »

Ask the Rebuilder